Nail the stakes across at the bottom with an angle of 45 degrees; one on every side to brace your post. Use a rubber mallet to pound the stake on the ground at an angle of 45 degrees. Then nail it on the fence post so that they will remain in place.Click to see full answer. Keeping this in view, how do you install a 4×4 fence post? Method 1 Setting the Post in Soil or Gravel Try this method if you have dense soil. Choose a durable fence post. Prep the wood against moisture (optional). Dig the hole. Drop gravel into the hole. Position the post in the hole. Fill the hole with tamped crushed stone or soil. Finish with a small hillock. Beside above, how do you support a corner fence post? Set your posts and braces Set your posts and braces. Dig a hole for the next upright just under 8′ away from your corner post along your fence line. Cut your “H” brace to fit between the corner post and the upright by holding the upright plumb and measuring to the face of the corner post. Keeping this in consideration, how much concrete do I need for a 4×4 fence post? Also 1-1/2 bags per hole is about right for a 4×4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6′ above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).Is 2 feet deep enough for fence posts?The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKR6urvUZpmrmZOaeqJ5k7FrZp6Vo7Cmec%2Boqq1lYmQ%3D